Camaro Rear Toe Arms with Eccentric Lockout Kit (5th Gen)
Brand : SPL Parts
- Part Number:
- SPL RTAEL CAM5
The SPL Rear Toe Arms provide the necessary adjustability to the rear toe to accommodate lower ride heights while also replacing the OEM stamped steel toe arm with a strong, lightweight aluminum arm with PTFE-lined spherical bushings to eliminate unwanted bumpsteer and improve stability.
This kit also includes our eccentric lockouts, which replace the slip prone OEM eccentric bolts with a standard bolt and lockplates to eliminate the chance of bolt slip causing the alignment to change.
Technical
Reduced Bumpsteer
Predictable Rear Toe Change
The OEM toe arm has two rubber bushings that deflect under load, leading to kinematic changes that can cause bumpsteer. The SPL arms use spherical bushings to eliminate this source of bumpsteer and chassis instability under hard load. The result is a more predictable and stable rear handling behavior.
Large Adjustment Range
Dial in Toe for Any Ride Height
Eccentrics are limited in their adjustment range, typically 12 - 14mm of adjustment. The SPL arms offer an adjustment range of 32mm in addition to a flippable lockplate to accommodate a wider variety of ride heights, camber angles, and suspension setups.
The eccentric lockout plates are also offset. This allows for the inner pivot point to be adjusted to increase or decrease the rate of toe change, or to extend the overall adjustment range for aggressive setups.
Eccentric Lockouts
Eliminate a Point of Failure
Eccentric bolts are a cheap and easy way for OEMs to provide basic adjustment. However, the high loads generated by track days and other driving events can cause these bolts to slip (rotate) which will change the alignment. Typically, once the bolt slips once, it will continue to slip when re-loaded, and can lead to significant tire wear, poor performance, or even dangerous handling conditions.
Benefits
- Wide Toe Adjustment Range
- Lightweight: 1.54 lbs (0.70 kg) per Side (46% Lighter than OEM)
- Reduced Bumpsteer
- Eliminate Bolt Slip
Materials
- 6061-T6 Billet Aluminum Toe Link (Anodized Black)
- 6061-T6 Billet 360° Clamps and Eccentric Lockout Plates
- 304 Stainless Steel Spacers
- Zinc Plated Class 10.9 Hardware
- Ti-6Al-4V Titanium 1/4"-20 Socket Head Allen Screws (Anodized Blue)
Noise, Vibration, and Harshness (NVH)
There's a small increase in NVH compared to the OEM arm due to the increase in lateral stiffness. Noise should be minimal, but any tramlining present will be more noticeable.
Applications
2010 - 2015 Chevrolet Camaro (5th Gen)
2014 - 2017 Chevrolet SS
2011 - 2017 Chevrolet Caprice PPV
2008 - 2009 Pontiac G8
2006 - 2012 Holden Commodore (VE)
2013 - 2017 Holden Commodore (VF)
ADDITIONAL FITMENT INFO
WILL THIS FIT A ...
We limit the above applications to known fitments from testing and research. If you're unsure if this is the proper part for your application, send us an email.
THIS SHOULD FIT MY CAR
Occasionally, parts will fit other vehicles not listed above. If you believe, or know, this part will fit your vehicle, send us an email and we'll work with you to confirm proper fitment.
Replaces OEM Part Number(s)
This is a list of known OEM part numbers. OEMs constantly make changes to part numbers due to part updates, suppliers, etc so this may not be a complete list.
19434229
92225625
22845487
22875567