1. Remove lower radiator hose.
2. Install radiator pipe and elbows, note that one of the elbows has a slightly smaller size on one end to match the radiator fitting.
3. Support the radiator pipe -- if using stock radiator, use the cushion clamp to secure the lower radiator pipe to the stock bracket, in place of the stock clamp. For aftermarket radiators, use the smaller cushion clamp on the sway bar and attach both cushion clamps together with the supplied bolt/nut, as seen below:
4. Make sure radiator pipe is secure and not rubbing against anything.
5. Fill radiator. Start the car and check for leaks.
Written by Aikmeng Kuah, SPL PARTS INC.
Sep 7 2004
Copyright SPL PARTS INC.