1. Unbolt outer (closer to wheel) bolt (17mm) of stock upper arms. Unbolt bracket from chassis (2x 17mm nuts and 2x 14mm nuts).
2. Unbolt stock upper arms from bracket and install SPL upper arms. Note that the upper arms should only install one way, the side that attaches to the brackets is slightly longer (marked with a dot). Mount the upper arms on the bracket as shown in the picture below (note the axis passing through the buckle should be centered between the 2 top mounting holes of the bracket).
3. Bolt up the bracket and install the outer bolt. Remember to tighten the lock collars.
Written by Aikmeng Kuah, SPL PARTS INC.
Apr 12 2004
Copyright SPL PARTS INC.